Main features:

● Accurate measurement to solve the diameter, height, runout, flatness, concentricity and other on-site measurement problems

● Faster than CMM and traditional measuring instruments

● Simultaneous display of all measurement results (up to 24 channels)

● Can be directly measured in the workshop site, beside the processing machine

● Direct all measurement results into the computer (measurement data can be traced)

● Convenient and safe operation

● Multi-channel processor with 8 Sylvac sensor input ports

● One PC can be connected to three processors, with extended connections up to 24 Sylvac sensors

● Suitable for dynamic measurement, up to 200 data can be read per second

● Can be directly connected through USB or RS232 port

● Optocoupler digital output port can be used to connect PLC controller

● Can input or save the processor system setting value, to achieve independent use from the computer

● LED tolerance display can prompt the processing status of the whole batch of workpiece

Application:

Software:

The D200S standard is equipped with powerful and user-friendly operating software. Before measuring, you need to customize the processor. The parameter setting of all channels can be completed with only one screen menu, which can be easily set for each channel one by one: upper and lower tolerance; The preset value; Measurement direction; Measurement mode and so on