SYLVAC-X_Treme XT3H
SYLVAC-X_Treme XT3H

The product range of digital display internal micrometer is very wide, from simple mechanical type to high precision digital display type, which can meet the requirements of various internal diameter measurement. Operation mode can be two - point, three - point, pistol or standard. Handle force measurement is constant, clamping claw free expansion reliability is good. Fast measuring speed, high precision, easy to use. It can also be equipped with up to 3000 kinds of probes to measure special workpieces such as threads and splines. It has RS232 / USB/Bluetooth® Technology/Proximity data interface.

  • Product parameters
  • 适用范围
  • 产品描述
  • 参数配置

X_Treme XT3 pistol digital display internal micrometer probe for hard alloy surface, measuring more than 12.5mm blind hole, preset three ring gauge values, mm/inch conversion, resolution 0.001mm, standard ring gauge with UKAS certificate, IP67 waterproof rating, battery use 3000 hours, RS232 / USB/Digimatic/Bluetooth transmission. With special probe, it can also measure inner ring groove, inner spline, outer spline, inner thread, outer thread and deep hole. Standard digital display internal micrometer can be selected individually or in a set. Optional special extension rod, measuring depth up to 2 meters.

瑞士SYLVAC-X_Treme XT3H 手枪数显标准内测千分尺

瑞士SYLVAC-X_Treme XT3H 手枪数显标准内测千分尺

Note: all XT3D and XT3H series probes are interchangeable, steel anvil below 12.5mm, tungsten anvil above 12.5mm


XT3H Bluetooth setDS18.003121DS18.003122DS18.003123DS18.003124DS18.003125DS18.003126DS18.003127
Measuring range mm2-66-1010-2020-5050-100100-150150-200
Probe the number 5233322
Ring gauge number 3122211
load N49919192222
XT3H Bluetooth setDS18.003128DS18.003129DS18.003130
Measuring range mm6-2020-100100-200
Probe the number 个564
Ring gauge number 个342
load N91922

XT3H single or set of technical parameters and order number:

The order number

Measuring rang

emm

Measuring the depth of the

mm

Maximum error

mm

Ring gauge

mm

Set order No.
DS18.0030862-2.590.0042.5DS18.003121
DS18.0030872.5-3.090.0042.5
DS18.0030883.0-4.0 120.0044
DS18.0030894.0-5.0180.0044
DS18.0030905.6-6.0180.0045
DS18.0030916.0-8.0580.0048DS18.003122
DS18.0030928.0-10.0580.0048
DS18.00309310.0-12.5580.00412.5DS18.003123
DS18.00309412.5-16.0620.00412.5
DS18.00309516.0-20.0620.00420
DS18.00309620-25660.00420DS18.003124
DS18.00309725-35660.00435
DS18.00309835-50800.00435
DS18.00309950-65800.00565DS18.003125
DS18.00310065-80800.00565
DS18.00310180-1001000.00580
DS18.003102100-1251150.006125DS18.003126
DS18.003103125-1501150.006125
DS18.003104150-1751150.007175DS18.003127
DS18.003105175-2001150.007175
DS18.003106200-2251180.008225
DS18.003107225-2501180.008225
DS18.003108250-2751180.009275
DS18.003109275-3001180.009275


The product range of digital display internal micrometer is very wide, from simple mechanical type to high precision digital display type, which can meet the requirements of various internal diameter measurement. Operation mode can be two - point, three - point, pistol or standard. Handle force measurement is constant, clamping claw free expansion reliability is good. Fast measuring speed, high precision, easy to use. It can also be equipped with up to 3000 kinds of probes to measure special workpieces such as threads and splines. It has RS232 / USB/Bluetooth® Technology/Proximity data interface.

upper ：SYLVAC-Ultimanext ：SYLVAC-X_Treme XT3D

Relevant recommendations